Product Series
Contact Us
Telephone
Address
Xian County Economic Development Zone, Cangzhou City, Hebei Province, China
ABS concrete test mold, plastic concrete test mold, concrete compressive strength mold
Keywords:
Share
- Product Description
-
ABS concrete test mold, plastic concrete test mold, concrete compressive strength mold
Model: Various specifications
I. Applications of Plastic Molds:
Plastic mold sets are essential laboratory tools used by departments such as highway, railway, water conservancy, construction, and engineering firms, as well as colleges and universities, for sampling and preparing test specimens for laboratory testing. They comply with the requirements of the People’s Republic of China industry standard JTG 3420—2020, “Test Procedures for Cement and Cement Concrete in Highway Engineering.”
II. Characteristics of Plastic Molds:
Plastic test molds are manufactured in a single step from virgin plastic, offering an economical price. A single empty box weighs only 0.8–0.9 kg; even with a concrete specimen inside, the total weight remains just 9.0–10.0 kg, making it easy for an average person to carry two undismantled units.
- Main technical specifications of the plastic test mold:
IV. Operating Procedures for Plastic Molding Dies:
1. The plastic mold is a single piece; the base plate has a vent hole, which should be covered with a small piece of paper during specimen preparation to prevent blockage.
2. When demolding, place the mold with its base facing up; use the dedicated demolding tool to gently inflate the air holes, and the test specimen will come out easily. Removing a set of molds takes no more than one minute. Afterwards, clean the molds thoroughly, apply machine oil, and store them for next use. Plastic molds are quick and easy to assemble and disassemble.
Reasons to Choose Us
Multiple specifications to choose from
Source factory
Ships promptly
Thoughtful service
Supports customization
Selected Raw Materials
Factory Advantages
Deep expertise, comprehensive product range
√Over 10 years of dedicated R&D and manufacturing of testing instruments for highway, construction, geotechnical, asphalt, cement, and other engineering applications.
√Comprehensive category coverage: from raw material testing to construction quality control, a one-stop solution.
√Compliant with international standards such as ISO and GB, meeting the regulatory requirements of overseas projects.
Reliable quality and excellent value for money.
√ We strictly adhere to the ISO 9001 quality management system, select core components from internationally renowned brands, and conduct full inspection before shipment.
√ In-house manufacturing + a large-scale supply chain deliver strong price competitiveness, with no markups from intermediaries.
√Stable and durable, with a low failure rate, reducing operational and maintenance costs for overseas customers.
Efficient delivery, global service
√In-stock inventory plus flexible manufacturing ensures 7–15 day rapid delivery, with support for customized rush orders.
√Cangzhou’s Lin’gang District boasts a strategic location, with convenient sea and air transportation and globally traceable logistics.
√Multilingual team with 24-hour technical support, offering installation and commissioning, training, a three‑year warranty, and ongoing follow-up services.
Operating with integrity and backed by extensive experience.
√13 years of industry expertise, serving over 30 countries and regions worldwide.
√The principle of “integrity in business, mutual benefit.”
√Deep understanding of international engineering standards and procurement processes, with efficient communication and seamless collaboration.
Frequently Asked Questions
Is the universal materials testing machine experiencing loading stalling or abnormal zeroing of load data?
1. Loading lag: Clean the lead screw and guide rails, apply lubricant, and remove debris from the transmission components. 2. Zeroing anomaly: Restart the equipment system, calibrate the load and displacement zero points, and check for poor electrical contact in the sensor wiring. 3. Overloading is strictly prohibited; before testing, verify that the grips are securely tightened to prevent eccentric loading of the specimen.
How often should in‑instrument verification be performed? Which instruments are required to undergo it?
High‑precision, high‑frequency‑use, and drift‑prone equipment (such as balances, penetration testers, water permeability testers, and sensor‑type devices) shall undergo intermediate verification every three months; routine equipment shall be verified every six months. Equipment that is within the verification/calibration interval, has been repaired following a malfunction, or has been relocated must undergo additional intermediate verification, with complete verification records maintained.
Is the repeatability of pendulum-type pavement friction coefficient measurements poor?
Key points for resolution: Prior to testing, thoroughly clean the pavement at each measurement point, ensuring there is no standing water, dust, or debris; calibrate the instrument’s level and zero point to ensure a standardized pendulum‑drop trajectory; strictly control the pendulum’s sliding distance; avoid conditions such as strong winds, wet pavement, or abrupt temperature changes; and calculate the average of multiple measurements taken at the same point.
How should one handle cases where the pavement infiltration meter data exceeds allowable error limits, exhibits leakage, or shows abnormal readings?
1. Sealing leaks: Inspect the base seal for aging or damage and replace it promptly; before testing, firmly press down on the base to expel any residual air inside. 2. Data deviation > ±2%: Calibrate the level sensor, clean any fouling from the graduated cylinder, and check for damage to the scale markings. 3. Compliance with new regulations: For seepage rates ≤ 300 mL/min, existing equipment may continue to be used; for rates > 300 mL/min, the accuracy of older equipment fails to meet standards, and such equipment must not be used.
Can the old Marshall compaction apparatus and stability tester still be used?
According to the 2025 revised asphalt testing procedures, after adjusting the indenter configuration on the Marshall stability test apparatus, existing instruments currently in use may continue to be operated normally without mandatory replacement; only periodic calibration to maintain accuracy and ensure equipment integrity is required.
What are the causes of uneven compaction and layered cracking in molded specimens during compaction testing?
Main causes: non‑vertical drop of the compaction hammer, rail jamming, excessive deviation in hammer weight, uneven layer thickness during loading, insufficient number of blows, or overload. Solutions: regularly lubricate the guide rails; verify and correct the vertical alignment of the hammer; strictly follow the procedure for layered material placement and step‑by‑step compaction; ensure that hammer weight and drop height comply with standards; and prevent over‑thick layers.
Related products
Content update in progress,...
Reputable manufacturer, quality assured.
Welcome to call for inquiries or visit our factory for a tour—let’s join forces for mutual success.
Contact Us
Direct supply from the manufacturer, excellent value for money, rapid custom non‑standard solutions, and 24‑hour response service.