Product Series
Contact Us
Telephone
Address
Xian County Economic Development Zone, Cangzhou City, Hebei Province, China
I. Product Overview The nail‑rod tear test fixture is designed and manufactured in accordance with GB/T 328.18‑2007, “Test Methods for Building Waterproofing Membranes—Part 18: Tear Resistance of Asphalt Waterproofing Membranes (Nail‑Rod Method).” It is primarily used to clamp asphalt roofing waterproofing membranes for determining their tear resistance using the nail‑rod method. This product features a simple structure and convenient operation. II. Main Technical Parameters 1. Specimen clamping width: 100 mm 2. Specimen clamping thickness: 2–6 mm 3. Nail‑rod diameter: Φ2.5 mm ± 0.1 mm 4. Material: aluminum alloy 5. Standard connector diameter: φ18 mm
JLD-271 Enhanced Cement Flexural Testing Apparatus, Four-Point Bending Fixture, with Stable Quality
The fixture for the flexural test of glass fiber‑reinforced cement, a four‑point bending fixture, is used to evaluate the flexural performance of glass fiber‑reinforced cement. It complies with the requirements of GB/T 15231‑2008, “Test Methods for Properties of Glass Fiber‑Reinforced Cement.”
Non-Stick Tire Time Tester BZT Tire Viscosity Meter
The tire‑non‑adhesion time tester is primarily used to determine the non‑tire‑adhesion drying time of “ambient‑temperature‑type road marking paints” and “heated‑type road marking paints” as specified in GA/T 298‑2001, “Road Marking Paints.” It also complies with the requirements of JT/T 280‑2004, “Road Surface Marking Paints.”
The water‑tight enclosure frame is used for impermeability testing of fiber‑cement products and is available in two types: one for corrugated tiles and one for flat panels. It is manufactured in accordance with GB/T 7019‑2014, “Test Methods for Fiber‑Cement Products.”
Application Overview: Widely used for drying, concentrating, distilling, and impregnating chemical reagents, pharmaceuticals, and biological products. It is especially suitable for heating substances that are prone to spilling or flammable, making it an essential tool in biology, genetics, aquaculture, environmental protection, medicine, public health, biochemical laboratories, and educational and research settings.
FBT-9B Specific Surface Area Analyzer, FBT-9 Cement Specific Surface Area Analyzer, Blaine Air Permeability Apparatus—Fully Automatic with New Standard Digital Display and Advanced Analysis
The lateral expansion test chamber is used to determine the lateral expansion of cement concrete mixtures and complies with the standard requirements of JTG 3420-2020, “Test Procedures for Cement and Cement Concrete in Highway Engineering.”
The water‑tight enclosure frame is used for impermeability testing of fiber‑cement products and is available in two types: one for corrugated tiles and one for flat panels. It is manufactured in accordance with GB/T 7019‑2014, “Test Methods for Fiber‑Cement Products.”
Electric Manual Rebar Spacing Gauge, Rebar Spacing Measuring Instrument, Rebar Marking Machine
The rebar gauge consists of a base, a support frame, a V‑shaped groove, a printing assembly, and an electrical circuit. It is a marking instrument specifically designed for measuring the elongation of reinforcing steel bars.
The main components comprise the oscillating assembly and the frame. 1. Base: Consists of T‑shaped legs, leveling screws, and a spirit level, providing leveling and support for the instrument. 2. Column: Comprises the column itself, a lifting mechanism, guide rods, and an instrument handle, used to raise or lower the pendulum and to lock it in position. 3. Release switch: Mounted on the cantilever, this switch serves to maintain the pendulum in a horizontal position and to release it for free fall. 4. Pendulum head: Made up of a clamping handle, pendulum axis, steering knuckle, bearings, and other parts, it connects the pendulum, secures its position, and allows free oscillation within the plane of swing. 5. Reading system: Includes a pointer, felt ring, flange, fastening nut, and dial; the pointer directly indicates the coefficient of friction. 6. Pendulum: Composed of upper and lower joints, pendulum rod, spring, lever system, lifting handle, housing, sliding block, and rubber pad. It applies a specified torque about the pivot point and exerts a prescribed pressure on the road surface, while maintaining moment equilibrium between front–rear and left–right directions; it serves as the standard for measuring the road’s coefficient of friction.
Nail‑rod watertightness tester, membrane‑nail‑rod watertightness tester, watertightness tester
This fixture is used for the water‑tightness test of nail‑rod fasteners on waterproofing membranes and complies with the technical requirements of GB 23441‑2009, “Self‑Adhesive Polymer‑Modified Bitumen Waterproofing Membranes.”
Reflectance Meter C84-III, Ratio Meter, Reflectance Tester, Reflectance Coating Film Opacity Tester
Our company’s C84‑III reflectance meter is a specialized instrument developed to help the coatings, pigments, inks, and other chemical industries comply with international and national standards. It can be used to determine the hiding power of paint films. This instrument fully meets the requirements specified in the international standard ISO 3906:1980(E), as well as the national standards GB/T 13452.3‑92, GB 9270‑88, and GB 5211.17‑88.
The water‑tight enclosure frame is used for impermeability testing of fiber‑cement products. It is available in two types: one for corrugated tiles and one for flat panels, and it is manufactured in accordance with GB/T 7019‑2014 “Test Methods for Fiber‑Cement Products.”
Cement mortar dry-shrinkage test mold, notched tamping rod, square-head tamping rod, test mold tamping rod for experiments
Chisel‑type rammer, square‑mouth rammer, cement testing equipment—available for immediate delivery.
Chisel‑type rammer, square‑mouth rammer, cement testing equipment—available for immediate delivery.
The concrete air‑content meter plays a vital role in the essential control of air content in concrete. Its simple operating procedures and robust safety features provide maximum convenience for users. It is widely employed in construction, highway and railway engineering, water conservancy and hydropower projects, airport development, and quality inspection of construction works, and can also be used for research and teaching experiments. Its applicable standards fully comply with GB/T 50080‑2016, “Test Methods for Fresh Concrete.”
Spray-disc concrete curing chamber with negative-ion humidifier for standard curing rooms
The concrete curing room/curing chamber is equipped with a negative-ion humidifier and an ultrasonic humidifier, both featuring a standard water inlet valve and a water purification filter to ensure water cleanliness, thereby extending the humidifier’s service life and enhancing its atomization efficiency. The power supply is 220V AC. Ultrasonic humidifiers are essential humidity-control equipment for laboratories and production workshops in industries such as highways, bridges, railways, water conservancy, and building construction, as well as in light‑industry and textile sectors, where precise humidity control is critical.
DKZ-5000 Cement Electric Flexural Testing Machine
The DKZ-5000 cement electric flexural testing machine is designed for cement plants, construction companies, and relevant academic and research institutions to determine the flexural strength of 40×40×160 mm prismatic cement mortar specimens, as well as the flexural strength of test blocks made from other non‑metallic brittle materials. The product complies with the requirements of GB/T 17671, GB 3350, BS 4550, and ISO 679 standards.
Reputable manufacturer, quality assured.
Welcome to call for inquiries or visit our factory for a tour—let’s join forces for mutual success.
Contact Us
Direct supply from the manufacturer, excellent value for money, rapid custom non‑standard solutions, and 24‑hour response service.
